A straight 1-2-1 frontier can prove two mines and a safe square. The numbers alone are not enough: the deduction depends on which unopened squares touch each clue. This guide builds the pattern from complete neighbor sets so you can check it before acting.

Check the boundary before reading the pattern

Each clue counts all adjacent mines, including diagonals. In the example below, A, B and C are the only unopened neighbors of the three clues. Every other adjacent square is revealed safe or outside the board. There are no adjacent confirmed mines to subtract. A touches the left 1 and the 2; B touches all three clues; C touches the 2 and the right 1.

This is an original local teaching fragment, not a complete board or today’s Daily puzzle. The three numbers run along the bottom edge of the board. Squares immediately left and right of this fragment are revealed safe wherever they touch a clue. If those side squares are still covered, this example does not apply unchanged.

ABC121
Unknown frontier: A B C. Revealed clues: 1 2 1. The deduction is A and C mined, B safe. Check the stated side boundaries first.

Work through the proof

  1. The left 1 has only A and B as unknown neighbors. Exactly one of A and B is a mine.
  2. The middle 2 has only A, B and C as unknown neighbors. Exactly two of those three are mines.
  3. A and B already supply one of the middle clue’s two mines. C must supply the other, so C is a mine.
  4. The right 1 touches B and C. Since C is a mine, B must be safe.
  5. The left 1 still needs its one mine. B is safe, so A must be a mine.

In compact form, let each letter be 1 for a mine and 0 for safe: A + B = 1, A + B + C = 2, B + C = 1. Subtracting the first equation from the second gives C = 1. The remaining equations give B = 0 and A = 1. There is only one assignment satisfying all three constraints.

What can invalidate a remembered 1-2-1?

An extra unopened square beside an end clue changes its neighbor set. For example, if the left 1 also touches unknown X, its equation becomes X + A + B = 1. You can no longer subtract A + B = 1 from the middle clue because that equation was never established. Seeing the printed digits 1, 2, 1 is not sufficient proof.

Confirmed adjacent mines also matter. Subtract only mines you have proved from each printed clue to get its remaining mine requirement. A printed 2 with one confirmed adjacent mine needs only one more. Apply the 1-2-1 argument only if the remaining requirements and the complete unknown-neighbor sets match the example. A guessed flag is not evidence.

Use the deduction in a practical routine

  1. Find three consecutive clues along a straight revealed frontier.
  2. Inspect every neighbor, especially the diagonals beyond both ends. Write down the unknown sets if the boundary is unclear.
  3. Subtract proven adjacent mines and confirm the three equations.
  4. Flag the two proven outer mines and reveal the safe middle square. Do not chord based on unproven flags.
  5. Recheck the newly revealed neighborhood. New clues may unlock simpler deductions elsewhere.

The pattern can be rotated or reflected: preserve which squares touch which clues rather than the orientation of the diagram. For controls and flag mode, read How to Play Minesweeper. For the underlying satisfied-clue and subset rules, start with Minesweeper Basic Patterns.

Common mistakes

  • Flagging the square above the 2. In this specific pattern, that middle square is safe; the outer two are mines.
  • Ignoring an extra covered diagonal beyond an end clue. It can change the deduction even when the visible numbers look familiar.
  • Counting all flags as proven mines. A mistaken flag contaminates the remaining requirements.
  • Using a chord before verifying every flag. A matching count does not establish correct placement.
  • Expecting one pattern to guarantee a win. Other parts of a board can still require different reasoning or involve uncertainty.

Frequently asked questions

Does the pattern require the physical board edge?

No. A revealed safe region can supply the same boundary. What matters is that no additional unknown neighbor or unaccounted mine changes the three equations.

Can the numbers run vertically?

Yes. Rotate the whole neighborhood, including the unknown frontier and its boundaries. The adjacency relationships and proof stay the same.

What should I do if the conditions do not match?

Return to the actual neighbor sets and remaining mine requirements. Look for another certain deduction. Do not label a square safe simply because part of the board resembles this diagram.

Practice one verified frontier

Open Minesweeper and look for a position where you can explain every unknown neighbor before acting. Visit Daily Challenges for today’s shared puzzle; this lesson does not reveal its solution.